LED
Common power: 2–6 W
Typical output: 150–600 lm
Colour options: Approximately 2200K–6500K
Voltage: Commonly 12V or 24V DC
Notes: Power and output figures are per foot. Indoor and coated damp- or wet-location products exist.
A high-density flexible LED strip that produces a smoother, more continuous line of light with fewer visible dots.
Closely packed LED chips sit beneath a nearly continuous phosphor layer, producing an even illuminated line rather than widely separated points.
Display shelves, joinery, cabinets, shallow channels, coves, hospitality interiors and architectural details.
COB construction is especially useful where the strip is directly visible or where limited diffuser depth makes conventional LED points noticeable.
Technologies represented in this library: LED.
Available base or connection types: Two-Pin Connector, Soldered Lead, Clip Connector.
Common power: 2–6 W
Typical output: 150–600 lm
Colour options: Approximately 2200K–6500K
Voltage: Commonly 12V or 24V DC
Notes: Power and output figures are per foot. Indoor and coated damp- or wet-location products exist.
These are representative market ranges, not guaranteed limits. Availability varies by manufacturer, voltage, length, environmental rating, region and product generation.
Compare voltage, strip width, wattage per foot, output, colour quality, cut interval, maximum run and the required driver or dimming system.
COB construction does not automatically make a strip suitable for wet locations or enclosed channels. Confirm the stated environmental and thermal requirements.
Important: This library entry describes a lighting format, not a particular product. Similar appearance does not guarantee matching voltage, connectors, dimensions, output, environmental rating or control requirements. Confirm the product label and datasheet, or ask a Bulb World lighting specialist.
Compare voltage, strip width, wattage per foot, output, colour quality, cut interval, maximum run and the required driver or dimming system.
COB construction does not automatically make a strip suitable for wet locations or enclosed channels. Confirm the stated environmental and thermal requirements.
These are common market ranges. Exact specifications vary by manufacturer and product
Send us a photo, the markings on your existing bulb, or your fixture details. Our team will help you identify a suitable replacement.