Static White LED
Common power: 2–6 W
Typical output: 100–500 lm
Colour options: Approximately 2200K–6500K
Voltage: Commonly 12V or 24V DC
Notes: Power and output figures are per foot. Outdoor and IP-rated versions are common.
A flexible diffused LED system that creates a smooth neon-like line for signs and architectural accents without exposed glass tubing.
LEDs are enclosed in an opaque diffusing silicone or polymer profile. Products are designed for top bending, side bending or multidirectional bending.
Signage, building outlines, hotels, restaurants, entertainment venues, retail environments and architectural accents.
The diffusing housing hides individual LED points. Static-white, single-colour, RGB, RGBW and animated pixel versions are available.
Technologies represented in this library: LED.
Available base or connection types: Factory Lead, Two-Wire Connector, RGB/RGBW Connector.
Common power: 2–6 W
Typical output: 100–500 lm
Colour options: Approximately 2200K–6500K
Voltage: Commonly 12V or 24V DC
Notes: Power and output figures are per foot. Outdoor and IP-rated versions are common.
Common power: 3–7 W
Typical output: Product-specific / primarily decorative
Colour options: RGB, RGBW and animated pixel options
Voltage: Commonly 24V DC
Notes: Power figures are per foot; requires a compatible controller.
These are representative market ranges, not guaranteed limits. Availability varies by manufacturer, voltage, length, environmental rating, region and product generation.
Choose the required bending direction, profile dimensions, voltage, colour system, output, cut interval, controller and environmental rating.
Do not bend neon flex against its specified direction or below its minimum bend radius. Field cuts and ends must be sealed exactly as directed.
Important: This library entry describes a lighting format, not a particular product. Similar appearance does not guarantee matching voltage, connectors, dimensions, output, environmental rating or control requirements. Confirm the product label and datasheet, or ask a Bulb World lighting specialist.
Choose the required bending direction, profile dimensions, voltage, colour system, output, cut interval, controller and environmental rating.
Do not bend neon flex against its specified direction or below its minimum bend radius. Field cuts and ends must be sealed exactly as directed.
These are common market ranges. Exact specifications vary by manufacturer and product
Send us a photo, the markings on your existing bulb, or your fixture details. Our team will help you identify a suitable replacement.